Do I need a permit for swimming pool or spa in Sandy Springs?
Yes. In Georgia, swimming pool or spa generally requires a permit, and Sandy Springs is no exception.
In-ground and most permanent pools and spas require a building permit plus electrical inspection in Georgia, along with a code-compliant safety barrier before final approval. Setbacks are measured to the pool and decking, so confirm side and rear yard requirements before excavation. Sandy Springs requires a Pool Permit for new pools and for repairs to pools or pool decking; the only stated exemption is an above-ground pool with a depth of 2 feet or less. A pre-construction meeting and site inspection must happen before any land-disturbing activity begins, and the residential review fee is $350 for an outdoor pool plus a $25 administrative fee and a $50 completion fee. Every pool requires a barrier fence and a separate Fence Permit, and Georgia enforces pool barrier and anti-entrapment (VGB) requirements that the city inspects. Fulton County's own permitting office is the Fulton County Planning, Zoning and Permitting, reachable on 404-612-7400 at https://www.fultoncountyga.gov/inside-fulton-county/fulton-county-departments/public-works/planning-zoning-and-permitting. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Georgia municipalities do not, this is the office that will handle the job. Fulton County sits inside the Metropolitan North Georgia Water Planning District, created by the Georgia General Assembly in 2001. Every local government in the District, cities included, has to adopt the District's model post-construction stormwater ordinance or an equivalent one at least as effective, so these rules follow you into any city in the county rather than stopping at the unincorporated line. A pool plus its decking adds a meaningful area of impervious surface, and the excavation itself is soil disturbance, so a large pool project is the residential job most likely to attract stormwater or erosion control conditions. In practice the thresholds are aimed at larger development rather than ordinary homeowner work, so most single-family projects sit below them. Cobb County, for example, publishes its trigger as adding more than 5,000 square feet of impervious surface or disturbing more than an acre. Each local government sets its own figures, so check yours before assuming. Where it does apply, the current standard is to retain the first 1.0 inch of rainfall on the site to the maximum extent practicable, which usually means a detention or infiltration feature rather than just grading water to the street.
Documents you may need
- Permit applicationrequired
- Site plan showing pool location, setbacks, and barrierrequired
- Pool / equipment and electrical plansLikely required
- Contractor license and insurance informationLikely required
- Pool Permit application through the Build Sandy Springs portalrequired
- Fence Permit application, since all swimming pools require a barrier fencerequired
- Site plan showing the pool location plus a Pool Installation Plan or Single Family Site Planrequired
- Backflow preventer evidence or water approval, and any Fulton County Health Department approvals depending on the projectSometimes required
- Stormwater or erosion control plan where the project reaches the local thresholdSometimes required
Possible inspections
- Steel / bonding and pre-gunite inspection (in-ground)
- Electrical bonding and equipment inspection
- Barrier / safety fence inspection
- Final inspection
- Pre-construction meeting and site inspection before any land-disturbing activity
- Additional inspections as set by the Building Inspector at the pre-construction meeting
- Barrier and final inspection before the pool is placed in use
Frequently asked questions
- Do I need a permit for swimming pool or spa in Sandy Springs?
- Yes. In Georgia, swimming pool or spa generally requires a permit, and Sandy Springs is no exception. In-ground and most permanent pools and spas require a building permit plus electrical inspection in Georgia, along with a code-compliant safety barrier before final approval. Setbacks are measured to the pool and decking, so confirm side and rear yard requirements before excavation. Sandy Springs requires a Pool Permit for new pools and for repairs to pools or pool decking; the only stated exemption is an above-ground pool with a depth of 2 feet or less. A pre-construction meeting and site inspection must happen before any land-disturbing activity begins, and the residential review fee is $350 for an outdoor pool plus a $25 administrative fee and a $50 completion fee. Every pool requires a barrier fence and a separate Fence Permit, and Georgia enforces pool barrier and anti-entrapment (VGB) requirements that the city inspects. Fulton County's own permitting office is the Fulton County Planning, Zoning and Permitting, reachable on 404-612-7400 at https://www.fultoncountyga.gov/inside-fulton-county/fulton-county-departments/public-works/planning-zoning-and-permitting. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Georgia municipalities do not, this is the office that will handle the job. Fulton County sits inside the Metropolitan North Georgia Water Planning District, created by the Georgia General Assembly in 2001. Every local government in the District, cities included, has to adopt the District's model post-construction stormwater ordinance or an equivalent one at least as effective, so these rules follow you into any city in the county rather than stopping at the unincorporated line. A pool plus its decking adds a meaningful area of impervious surface, and the excavation itself is soil disturbance, so a large pool project is the residential job most likely to attract stormwater or erosion control conditions. In practice the thresholds are aimed at larger development rather than ordinary homeowner work, so most single-family projects sit below them. Cobb County, for example, publishes its trigger as adding more than 5,000 square feet of impervious surface or disturbing more than an acre. Each local government sets its own figures, so check yours before assuming. Where it does apply, the current standard is to retain the first 1.0 inch of rainfall on the site to the maximum extent practicable, which usually means a detention or infiltration feature rather than just grading water to the street.
- Who issues the permit in Sandy Springs?
- The local building department for Sandy Springs handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.