Do I need a permit for shed or accessory structure in Deltona?
Yes. In Florida, shed or accessory structure generally requires a permit, and Deltona is no exception.
Florida has no statewide small-shed exemption. The widely repeated rule that a shed under 120 square feet needs no permit comes from the model International Codes, and Florida did not adopt it: section 105.2 of the Florida Building Code, Building exempts only specified gas, mechanical and plumbing work, with no category exempting detached accessory structures. Where a size threshold exists it is a local ordinance, and it genuinely differs, so ask your building department for the line that applies at your address. Any shed with electricity, plumbing or a permanent foundation needs a permit regardless of size, and zoning setbacks, flood zone rules and wind anchoring apply even when no building permit is required.
Florida and local notes for Deltona
Volusia County's own permitting office is the Building and Code Administration Permit Center, reachable on 386-736-5929 at https://www.volusia.org/services/growth-and-resource-management/building-and-zoning/. It issues permits for the unincorporated county. If your city does not run its own building department, this is the office that will handle the job. Contractor licensing here is centralised across the county. Volusia County Contractor Licensing exists to provide a uniform system for regulating registered contractors in the unincorporated county and all the municipalities within Volusia County, with one stated exception, the City of Pierson. So unless you are in Pierson, your contractor's local registration runs through the county: 386-736-5929, clca@volusia.gov, 123 W Indiana Avenue Room 203, DeLand. Deltona's Residential Shed Checklist states that all sheds require a permit, with no size exemption. On residential lots of 20,000 square feet or less, Deltona allows up to two sheds totaling no more than 240 square feet, and City Code 110-827 caps shed height at 15 feet and no taller than the house. Sheds over 120 square feet need signed and sealed engineered drawings by a Florida licensed engineer or architect, while sheds of 120 square feet or less need a survey and the anchoring method. In the R1 single-family districts, City Code 110-307 requires accessory structures to be at least 10 feet from the rear lot line and 6 feet from interior side lot lines, not in the front yard, and within the 35 percent maximum lot coverage.
Documents you may need
- Permit applicationLikely required
- Site plan showing setbacksLikely required
- Structure dimensions or manufacturer drawingsSometimes required
- Anchoring or tie-down detailsSometimes required
- Permit or zoning applicationLikely required
- Site plan showing setbacks and distance to lot linesLikely required
- Anchoring or tie-down details for wind loadSometimes required
- Contractor license number issued or recognised by the countyLikely required
- City of Deltona Building Permit ApplicationLikely required
- Survey of existing conditions with the shed location delineated and the anchoring methodLikely required
- Signed and sealed engineered drawings for sheds over 120 square feetSometimes required
- Florida product approvals and installation instructions for doors, windows, siding, and non-shingle roofing on sheds over 120 square feetSometimes required
Possible inspections
- Foundation or slab inspection
- Framing and anchoring inspection
- Final inspection
- Anchoring and final inspection
Frequently asked questions
- Do I need a permit for shed or accessory structure in Deltona?
- Yes. In Florida, shed or accessory structure generally requires a permit, and Deltona is no exception. The documents and inspections sections on this page list what the building department typically asks for.
- Who issues the permit in Deltona?
- The local building department for Deltona handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.