Do I need a permit for fence installation or replacement in Daytona Beach Shores?
It depends. Whether fence installation or replacement needs a permit in Daytona Beach Shores comes down to the details of your project.
There is no statewide fence permit rule in Florida, so requirements are set locally. Some jurisdictions exempt common fences below a set height, such as chain-link or wood fences up to a certain height, while others require a permit for essentially all new residential fences. Height, setback, and corner sight-triangle rules apply everywhere, and HOA rules may add more.
Local detail for Daytona Beach Shores: Building Division office is on the 2nd floor of City Hall.
Florida and local notes for Daytona Beach Shores
Florida has no statewide list of building work exempt from a permit. Section 105.2 of the Florida Building Code, Building, exempts only certain gas, mechanical and plumbing work, so whether a fence needs a permit is decided by your local building department rather than by a state threshold. Even where no building permit is needed, zoning height, setback, corner-visibility, and HOA rules still apply. Cities set their own fence ordinances that can differ from the county. Fences in an easement may require an acknowledgement and can be removed if a utility needs access. Volusia County's own permitting office is the Building and Code Administration Permit Center, reachable on 386-736-5929 at https://www.volusia.org/services/growth-and-resource-management/building-and-zoning/. It issues permits for the unincorporated county. If your city does not run its own building department, this is the office that will handle the job. Contractor licensing here is centralised across the county. Volusia County Contractor Licensing exists to provide a uniform system for regulating registered contractors in the unincorporated county and all the municipalities within Volusia County, with one stated exception, the City of Pierson. So unless you are in Pierson, your contractor's local registration runs through the county: 386-736-5929, clca@volusia.gov, 123 W Indiana Avenue Room 203, DeLand.
Documents you may need
- Permit application (where required)Sometimes required
- Site plan or survey showing fence location and property linesLikely required
- Easement acknowledgement (if in an easement)Sometimes required
- Contractor license number issued or recognised by the countyLikely required
Possible inspections
- Setback or post-location inspection (some jurisdictions)
- Final inspection
Frequently asked questions
- Do I need a permit for fence installation or replacement in Daytona Beach Shores?
- It depends. Whether fence installation or replacement needs a permit in Daytona Beach Shores comes down to the details of your project. The documents and inspections sections on this page list what the building department typically asks for.
- Who issues the permit in Daytona Beach Shores?
- The local building department for Daytona Beach Shores handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.