Skip to content
PermitRoadmap

Do I need a permit for fence installation or replacement in Century?

Permit may be required

It depends. Whether fence installation or replacement needs a permit in Century comes down to the details of your project.

There is no statewide fence permit rule in Florida, so requirements are set locally. Some jurisdictions exempt common fences below a set height, such as chain-link or wood fences up to a certain height, while others require a permit for essentially all new residential fences. Height, setback, and corner sight-triangle rules apply everywhere, and HOA rules may add more.

Local detail for Century: Century is served by Escambia County Building Services for permits, plan review and inspections; town handles local planning and zoning.

Local and county notes for Century

On a corner lot or near an intersection, sight-visibility (sight-triangle) rules commonly limit fence height near the corner so drivers can see. Confirm the exact limit and setback with your city or county before building. Front-yard fences usually face a lower maximum height than rear or side yards, and some areas restrict certain materials in front. Confirm your jurisdiction's front-yard fence height and material limits before building. Escambia County's own permitting office is the Escambia County Building Services office, reachable on 850-595-3550 at https://myescambia.com/our-services/building-services. Its online permit portal is https://www.mygovernmentonline.org. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Florida municipalities do not, this is the office that will handle the job. Fences are usually a zoning review rather than a building permit, and the zoning office may be separate from the building office. Florida has no statewide list of building work exempt from a permit. Section 105.2 of the Florida Building Code, Building, exempts only certain gas, mechanical and plumbing work, so whether a fence needs a permit is decided by your local building department rather than by a state threshold. Even where no building permit is needed, zoning height, setback, corner-visibility, and HOA rules still apply. Cities set their own fence ordinances that can differ from the county. Fences in an easement may require an acknowledgement and can be removed if a utility needs access. Century permits are handled by the Century Escambia County Building Services, reachable on 850-595-3550 at https://myescambia.com/our-services/building-services. Its online permit portal is https://www.mygovernmentonline.org. Escambia County also issues permits for the unincorporated county, and many smaller Florida municipalities contract building services to it rather than running a department of their own, so confirm which office covers your address before you apply.

Documents you may need

  • Permit application (where required)Sometimes required
  • Site plan or survey showing fence location and property linesLikely required
  • Easement acknowledgement (if in an easement)Sometimes required

Possible inspections

  • Setback or post-location inspection (some jurisdictions)
  • Final inspection

Frequently asked questions

Do I need a permit for fence installation or replacement in Century?
It depends. Whether fence installation or replacement needs a permit in Century comes down to the details of your project. There is no statewide fence permit rule in Florida, so requirements are set locally. Some jurisdictions exempt common fences below a set height, such as chain-link or wood fences up to a certain height, while others require a permit for essentially all new residential fences. Height, setback, and corner sight-triangle rules apply everywhere, and HOA rules may add more.
Who issues the permit in Century?
The local building department for Century handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
How do I find out the exact requirements for my project?
Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.

PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.