Do I need a permit for fence installation or replacement in Coral Springs?
Yes. In Florida, fence installation or replacement generally requires a permit, and Coral Springs is no exception.
There is no statewide fence permit rule in Florida, so requirements are set locally. Some jurisdictions exempt common fences below a set height, such as chain-link or wood fences up to a certain height, while others require a permit for essentially all new residential fences. Height, setback, and corner sight-triangle rules apply everywhere, and HOA rules may add more.
Florida and local notes for Coral Springs
Florida has no statewide list of building work exempt from a permit. Section 105.2 of the Florida Building Code, Building, exempts only certain gas, mechanical and plumbing work, so whether a fence needs a permit is decided by your local building department rather than by a state threshold. Even where no building permit is needed, zoning height, setback, corner-visibility, and HOA rules still apply. Cities set their own fence ordinances that can differ from the county. Fences in an easement may require an acknowledgement and can be removed if a utility needs access. Fences are reviewed for HVHZ wind loads here, so height, material and post embedment matter more than in most of the state. Your city issues the permit, not the county. Broward's 31 municipal building departments each run their own permitting and inspections, while the county Board of Rules and Appeals sets code interpretation and the countywide amendments they all work from. The Broward County Amendments to the Florida Building Code, published by the Board of Rules and Appeals under the county charter, apply on top of the state code everywhere in the county. Individual cities can add their own amendments as well, so confirm both. Under LDC Sec. 250128, residential fences are limited to 4 feet in the front yard and 6 feet on the sides and rear. Chain link is banned in front yards and must be vinyl coated in green, black, or bronze. Opaque fences are prohibited along any property line next to a waterway, and wood and PVC fences must be semi-private styles such as shadowbox or board-on-board with 9 to 15 inches of lattice. The city's fence guidelines require sides facing a street or waterway to sit 2.5 feet inside the property line, with shrubs at least 18 inches tall planted no more than 18 inches apart. When a contractor installs the fence, the city issues two permit numbers, one for the fence and one for the landscaping, and the permit closes only after both pass.
Documents you may need
- Permit application (where required)Sometimes required
- Site plan or survey showing fence location and property linesLikely required
- Easement acknowledgement (if in an easement)Sometimes required
- Product approval or Notice of Acceptance documentation for HVHZ rated materialsSometimes required
- Broward County Uniform Building Permit Application, submitted electronically through eTRAKiT listing linear feet of fence and gate height and widthLikely required
- Building Permit Application Zoning AddendumLikely required
- Survey showing the fence and setback dimensions to all property linesLikely required
- Landscape AffidavitLikely required
- Fence Easement Agreement if the fence is in an easementSometimes required
- Drainage District Approval Letter if the lot borders a waterwaySometimes required
- Product Approvals for fences other than chain link or woodSometimes required
Possible inspections
- Setback or post-location inspection (some jurisdictions)
- Final inspection
- Zoning inspection of the fence
- Landscape inspection of the required shrubs
Frequently asked questions
- Do I need a permit for fence installation or replacement in Coral Springs?
- Yes. In Florida, fence installation or replacement generally requires a permit, and Coral Springs is no exception. The documents and inspections sections on this page list what the building department typically asks for.
- Who issues the permit in Coral Springs?
- The local building department for Coral Springs handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.