Do I need a permit for window or exterior door replacement in Palm Shores?
Yes. In Florida, window or exterior door replacement generally requires a permit, and Palm Shores is no exception.
Replacing windows or exterior doors, including garage doors, generally requires a permit in Florida even when the new unit is the same size, because the opening must meet current wind-load requirements. Each product must carry a valid Florida Product Approval, or a Miami-Dade Notice of Acceptance in High-Velocity Hurricane Zones. A few jurisdictions allow narrow same-size, glass-only exceptions.
Local detail for Palm Shores: The Town of Palm Shores official site (townofpalmshores.org) was still unreachable on 2026-07-19 (DNS not resolving), so its building-permit process could not be confirmed against the official source. Indexed/cached content indicates the town likely runs its OWN Building Department (which would mean permits are not routed to Brevard County), so no county routing was applied. Town Hall: 5030 Paul Hurtt Lane, Palm Shores, FL 32940, 321-242-4555. Re-verify once the official site is back online.
Local and county notes for Palm Shores
Like-for-like replacement usually does not waive the permit in Florida. The product approval must match the wind-load rating for your specific address. Brevard County's own permitting office is the Brevard County Building Permits office, reachable on 321-633-2187 at https://www.brevardfl.gov/PlanningAndDevelopment/BuildingPermits/BrevardCountyBuildingPermits. Its online permit portal is https://aca-prod.accela.com/brevard/Default.aspx. It issues permits for the unincorporated county. If your city does not run its own building department, this is the office that will handle the job. Brevard County publishes its wind speed requirements as a set of maps, one per Risk Category, that you search by street address. Most houses are Risk Category 2. Screen enclosures are explicitly Risk Category 1, which is a lower design requirement than the house they attach to. Be aware the county's own map instructions still tell you to install Microsoft Silverlight, which no current browser supports, so in practice you may need to call the Building Department on 321-633-2187 to get the design wind speed for your address.
Documents you may need
- Permit applicationLikely required
- Florida Product Approval or Miami-Dade NOA for each unitLikely required
- Window and door layout or opening scheduleSometimes required
- Notice of commencement (for work over the statutory value)Sometimes required
- Design wind speed for the parcel and its Risk CategorySometimes required
Possible inspections
- In-progress fastening and flashing inspection
- Final inspection
Frequently asked questions
- Do I need a permit for window or exterior door replacement in Palm Shores?
- Yes. In Florida, window or exterior door replacement generally requires a permit, and Palm Shores is no exception. Replacing windows or exterior doors, including garage doors, generally requires a permit in Florida even when the new unit is the same size, because the opening must meet current wind-load requirements. Each product must carry a valid Florida Product Approval, or a Miami-Dade Notice of Acceptance in High-Velocity Hurricane Zones. A few jurisdictions allow narrow same-size, glass-only exceptions.
- Who issues the permit in Palm Shores?
- The local building department for Palm Shores handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.