Do I need a permit for fence installation or replacement in Palm Shores?
It depends. Whether fence installation or replacement needs a permit in Palm Shores comes down to the details of your project.
There is no statewide fence permit rule in Florida, so requirements are set locally. Some jurisdictions exempt common fences below a set height, such as chain-link or wood fences up to a certain height, while others require a permit for essentially all new residential fences. Height, setback, and corner sight-triangle rules apply everywhere, and HOA rules may add more.
Local detail for Palm Shores: The Town of Palm Shores official site (townofpalmshores.org) was still unreachable on 2026-07-19 (DNS not resolving), so its building-permit process could not be confirmed against the official source. Indexed/cached content indicates the town likely runs its OWN Building Department (which would mean permits are not routed to Brevard County), so no county routing was applied. Town Hall: 5030 Paul Hurtt Lane, Palm Shores, FL 32940, 321-242-4555. Re-verify once the official site is back online.
Local and county notes for Palm Shores
On a corner lot or near an intersection, sight-visibility (sight-triangle) rules commonly limit fence height near the corner so drivers can see. Confirm the exact limit and setback with your city or county before building. Front-yard fences usually face a lower maximum height than rear or side yards, and some areas restrict certain materials in front. Confirm your jurisdiction's front-yard fence height and material limits before building. Brevard County's own permitting office is the Brevard County Building Permits office, reachable on 321-633-2187 at https://www.brevardfl.gov/PlanningAndDevelopment/BuildingPermits/BrevardCountyBuildingPermits. Its online permit portal is https://aca-prod.accela.com/brevard/Default.aspx. It issues permits for the unincorporated county. If your city does not run its own building department, this is the office that will handle the job. Brevard County publishes its wind speed requirements as a set of maps, one per Risk Category, that you search by street address. Most houses are Risk Category 2. Screen enclosures are explicitly Risk Category 1, which is a lower design requirement than the house they attach to. Be aware the county's own map instructions still tell you to install Microsoft Silverlight, which no current browser supports, so in practice you may need to call the Building Department on 321-633-2187 to get the design wind speed for your address. Florida has no statewide list of building work exempt from a permit. Section 105.2 of the Florida Building Code, Building, exempts only certain gas, mechanical and plumbing work, so whether a fence needs a permit is decided by your local building department rather than by a state threshold. Even where no building permit is needed, zoning height, setback, corner-visibility, and HOA rules still apply. Cities set their own fence ordinances that can differ from the county. Fences in an easement may require an acknowledgement and can be removed if a utility needs access.
Documents you may need
- Design wind speed for the parcel and its Risk CategorySometimes required
- Permit application (where required)Sometimes required
- Site plan or survey showing fence location and property linesLikely required
- Easement acknowledgement (if in an easement)Sometimes required
Possible inspections
- Setback or post-location inspection (some jurisdictions)
- Final inspection
Frequently asked questions
- Do I need a permit for fence installation or replacement in Palm Shores?
- It depends. Whether fence installation or replacement needs a permit in Palm Shores comes down to the details of your project. There is no statewide fence permit rule in Florida, so requirements are set locally. Some jurisdictions exempt common fences below a set height, such as chain-link or wood fences up to a certain height, while others require a permit for essentially all new residential fences. Height, setback, and corner sight-triangle rules apply everywhere, and HOA rules may add more.
- Who issues the permit in Palm Shores?
- The local building department for Palm Shores handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.