Do I need a permit for fence installation or replacement in Irving?
It depends. Whether fence installation or replacement needs a permit in Irving comes down to the details of your project.
Irving regulates fences under Chapter 15 of its code: a new or replacement fence generally needs review and a permit from the Inspections Department, while minor repair or replacement of a fence under 6 feet in an interior yard may not. In a residential district a front-yard fence is limited to 4 feet in height and must be at least 50 percent transparent, and no fence may block the sight triangle at a corner lot; masonry walls over 4 feet also require a permit. A fence used as a swimming pool barrier has additional safety requirements, so confirm current fence rules with the Irving Inspections Department at (972) 721-2371 before installing. Texas adopts the International Residential Code as the municipal residential building code by statute. Texas Local Government Code Section 214.212 adopts the code as it existed on May 1, 2012, and that edition exempts fences not over 6 feet high. A municipality may adopt local amendments and may take up later editions, and the 2015 and later editions moved that line to 7 feet, so confirm which edition your city enforces. Texas cities set fence rules by height and location on top of that. Dallas, for example, does not require a permit for fences up to 4 feet in a front yard or 6 feet in side and rear yards, but taller, masonry, or corner-visibility fences may need one. Check HOA rules and plat easement restrictions even when a building permit is not required, and confirm the height thresholds with your local building department. A fence over 7 feet is outside the exemption in every edition of the International Residential Code a Texas city could be enforcing, both the 2012 edition the statute adopts and the later editions a city may take up, so a building permit is required. Between 6 and 7 feet the answer depends on which edition your city enforces, so confirm that with the building department.
Documents you may need
- Fence permit application through the My Government Online (MGO) portalLikely required
- Site plan or survey showing the fence location, height, material, and any gatesLikely required
- Permit applicationSometimes required
- Site plan or plat showing fence location and heightLikely required
Possible inspections
- Final fence inspection
- Post or footing inspection (masonry or over-height fences)
- Final inspection
Frequently asked questions
- Do I need a permit for fence installation or replacement in Irving?
- It depends. Whether fence installation or replacement needs a permit in Irving comes down to the details of your project. Irving regulates fences under Chapter 15 of its code: a new or replacement fence generally needs review and a permit from the Inspections Department, while minor repair or replacement of a fence under 6 feet in an interior yard may not. In a residential district a front-yard fence is limited to 4 feet in height and must be at least 50 percent transparent, and no fence may block the sight triangle at a corner lot; masonry walls over 4 feet also require a permit. A fence used as a swimming pool barrier has additional safety requirements, so confirm current fence rules with the Irving Inspections Department at (972) 721-2371 before installing. Texas adopts the International Residential Code as the municipal residential building code by statute. Texas Local Government Code Section 214.212 adopts the code as it existed on May 1, 2012, and that edition exempts fences not over 6 feet high. A municipality may adopt local amendments and may take up later editions, and the 2015 and later editions moved that line to 7 feet, so confirm which edition your city enforces. Texas cities set fence rules by height and location on top of that. Dallas, for example, does not require a permit for fences up to 4 feet in a front yard or 6 feet in side and rear yards, but taller, masonry, or corner-visibility fences may need one. Check HOA rules and plat easement restrictions even when a building permit is not required, and confirm the height thresholds with your local building department. A fence over 7 feet is outside the exemption in every edition of the International Residential Code a Texas city could be enforcing, both the 2012 edition the statute adopts and the later editions a city may take up, so a building permit is required. Between 6 and 7 feet the answer depends on which edition your city enforces, so confirm that with the building department.
- Who issues the permit in Irving?
- The local building department for Irving handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.