Do I need a permit for pavers, driveway, or hardscape in Cary?
It depends. Whether pavers, driveway, or hardscape needs a permit in Cary comes down to the details of your project.
The Town of Cary lists patios at grade as not requiring a permit as long as the patio remains at least 5 feet from property lines, so a simple at-grade paver patio generally does not need a building permit. Residential driveways and curb cuts do require a permit under Cary's rules, so a new or replaced driveway or a new curb cut is not covered by the patio exemption. Confirm whether your hardscape touches the right-of-way, changes drainage, or sits within 5 feet of a property line before starting, since those factors move the project into permitted work. Wake County's own permitting office is Wake County Permits and Inspections. It issues permits for the unincorporated county, and in North Carolina the county is often the building authority even inside city limits, so confirm which applies to your address. Erosion control here depends on which town you are in. Wake County administers erosion control for all unincorporated areas plus six municipalities under interlocal agreements: Garner, Knightdale, Morrisville, Wendell, Rolesville and Zebulon. If you are in one of those six, or in the unincorporated county, your plan goes to Wake County. Raleigh, Cary, Apex and the other Wake towns run their own programs. A long driveway or extensive hardscape adds both disturbance and built-upon area, so confirm before ordering material. The trigger is size, not cost: Wake County reviews construction plans for land development over one acre of disturbance. Ordinary single-family work is normally well under that, so this bites on large lots, big site regrading, or a project combined with substantial clearing. Ground-level patios, walkways and driveways of pavers commonly fall under the NCGS 160D-1110(c) cost test and may not need a building permit, but added impervious surface can trigger stormwater, watershed or zoning review in many North Carolina jurisdictions. Confirm before you begin. A raised deck or any electrical for landscape lighting requires its own permit and is not exempt, because both are named exceptions to the cost test. Most North Carolina departments treat a retaining wall as structural work above a set height, commonly 4 feet or any height where the wall supports a surcharge. North Carolina publishes no statewide work-exempt list, so that figure comes from the model residential code rather than from state law. Confirm the height your inspections department uses.
Documents you may need
- Residential permit application through the Town of Cary electronic plan review portal for a new driveway or curb cutSometimes required
- Site plan showing the paved area, driveway location, and distance to property linesSometimes required
- Erosion and sedimentation control plan where disturbance exceeds one acreSometimes required
- Zoning / grading permit application (where required)Sometimes required
- Site plan showing coverage, setbacks, and drainageSometimes required
Possible inspections
- Driveway or curb-cut inspection where applicable
- Final inspection for permitted right-of-way or driveway work
- Zoning / impervious-surface or grading review where applicable
- Final inspection where a permit is issued
Frequently asked questions
- Do I need a permit for pavers, driveway, or hardscape in Cary?
- It depends. Whether pavers, driveway, or hardscape needs a permit in Cary comes down to the details of your project. The Town of Cary lists patios at grade as not requiring a permit as long as the patio remains at least 5 feet from property lines, so a simple at-grade paver patio generally does not need a building permit. Residential driveways and curb cuts do require a permit under Cary's rules, so a new or replaced driveway or a new curb cut is not covered by the patio exemption. Confirm whether your hardscape touches the right-of-way, changes drainage, or sits within 5 feet of a property line before starting, since those factors move the project into permitted work. Wake County's own permitting office is Wake County Permits and Inspections. It issues permits for the unincorporated county, and in North Carolina the county is often the building authority even inside city limits, so confirm which applies to your address. Erosion control here depends on which town you are in. Wake County administers erosion control for all unincorporated areas plus six municipalities under interlocal agreements: Garner, Knightdale, Morrisville, Wendell, Rolesville and Zebulon. If you are in one of those six, or in the unincorporated county, your plan goes to Wake County. Raleigh, Cary, Apex and the other Wake towns run their own programs. A long driveway or extensive hardscape adds both disturbance and built-upon area, so confirm before ordering material. The trigger is size, not cost: Wake County reviews construction plans for land development over one acre of disturbance. Ordinary single-family work is normally well under that, so this bites on large lots, big site regrading, or a project combined with substantial clearing. Ground-level patios, walkways and driveways of pavers commonly fall under the NCGS 160D-1110(c) cost test and may not need a building permit, but added impervious surface can trigger stormwater, watershed or zoning review in many North Carolina jurisdictions. Confirm before you begin. A raised deck or any electrical for landscape lighting requires its own permit and is not exempt, because both are named exceptions to the cost test. Most North Carolina departments treat a retaining wall as structural work above a set height, commonly 4 feet or any height where the wall supports a surcharge. North Carolina publishes no statewide work-exempt list, so that figure comes from the model residential code rather than from state law. Confirm the height your inspections department uses.
- Who issues the permit in Cary?
- The local building department for Cary handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.