Do I need a permit for screen enclosure or pool cage in Edgewater?
Yes. In Florida, screen enclosure or pool cage generally requires a permit, and Edgewater is no exception.
Building a new aluminum screen enclosure or pool cage requires a building permit statewide, and the frame must be designed to Florida Building Code wind-load provisions with signed and sealed engineering. Replacing only the screen mesh is usually not permitted work, but new construction or structural frame repair is. A pool cage that serves as the pool safety barrier has added requirements.
Florida and local notes for Edgewater
Site-specific engineered wind-load drawings are effectively required for a new enclosure. Setbacks, easements, and HOA rules still apply. Re-screening mesh only is generally exempt; structural work is not. Volusia County's own permitting office is the Building and Code Administration Permit Center, reachable on 386-736-5929 at https://www.volusia.org/services/growth-and-resource-management/building-and-zoning/. It issues permits for the unincorporated county. If your city does not run its own building department, this is the office that will handle the job. Contractor licensing here is centralised across the county. Volusia County Contractor Licensing exists to provide a uniform system for regulating registered contractors in the unincorporated county and all the municipalities within Volusia County, with one stated exception, the City of Pierson. So unless you are in Pierson, your contractor's local registration runs through the county: 386-736-5929, clca@volusia.gov, 123 W Indiana Avenue Room 203, DeLand. Edgewater permits screen rooms on its Accessory Structure/Screenroom/Dock Permit application, which requires a survey and engineering plans. The application's accessory rules bar accessory structures from front yards, public rights-of-way, and public easements, and they count toward the district's maximum building and impervious coverage. A screen enclosure used as the pool barrier must meet Florida Building Code Residential section R4501.17.1.11, which the city checks at the pool final.
Documents you may need
- Permit applicationLikely required
- Signed and sealed engineered drawings with wind-load calculationsLikely required
- Site plan showing setbacksLikely required
- Aluminum member and anchoring specificationsSometimes required
- Contractor license number issued or recognised by the countyLikely required
- City of Edgewater Accessory Structure/Screenroom/Dock Permit applicationLikely required
- Survey showing the location of the structureLikely required
- Engineering plans for the structureLikely required
- Recorded Notice of Commencement for direct contracts of $5,000 or moreSometimes required
Possible inspections
- Footing or slab inspection for a new slab
- Framing or structural inspection
- Final inspection
- Footing or anchoring inspection
Frequently asked questions
- Do I need a permit for screen enclosure or pool cage in Edgewater?
- Yes. In Florida, screen enclosure or pool cage generally requires a permit, and Edgewater is no exception. The documents and inspections sections on this page list what the building department typically asks for.
- Who issues the permit in Edgewater?
- The local building department for Edgewater handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.