Do I need a permit for screen enclosure or pool cage in Dade City?
Yes. In Florida, screen enclosure or pool cage generally requires a permit, and Dade City is no exception.
Building a new aluminum screen enclosure or pool cage requires a building permit statewide, and the frame must be designed to Florida Building Code wind-load provisions with signed and sealed engineering. Replacing only the screen mesh is usually not permitted work, but new construction or structural frame repair is. A pool cage that serves as the pool safety barrier has added requirements.
Local detail for Dade City: The Dade City Building Division also issues building permits for the City of San Antonio and the Town of Saint Leo under interlocal agreements. Building official direct line 352-521-1460.
Local and county notes for Dade City
Site-specific engineered wind-load drawings are effectively required for a new enclosure. Setbacks, easements, and HOA rules still apply. Re-screening mesh only is generally exempt; structural work is not. Pasco County's own permitting office is the Pasco County Building Construction Services office, reachable on 727-847-8126 at https://www.pascocountyfl.gov/services/building_construction/index.php. Its online permit portal is https://aca-prod.accela.com/pasco/Default.aspx. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Florida municipalities do not, this is the office that will handle the job. Screen enclosures are engineered for wind load in Florida, so expect signed and sealed drawings and a structural review. Dade City permits are handled by the Dade City Building Department, reachable on (352) 523-5050 at https://www.dadecityfl.com/our_government/departments/building_department/index.php. Its online permit portal is https://dadepermit.portal.iworq.net/portalhome/dadepermit. Pasco County also issues permits for the unincorporated county, and many smaller Florida municipalities contract building services to it rather than running a department of their own, so confirm which office covers your address before you apply. An attached enclosure is a structural addition, so expect a plan review and a footing and attachment inspection.
Documents you may need
- Permit applicationLikely required
- Signed and sealed engineered drawings with wind-load calculationsLikely required
- Site plan showing setbacksLikely required
- Aluminum member and anchoring specificationsSometimes required
Possible inspections
- Footing or slab inspection for a new slab
- Framing or structural inspection
- Final inspection
Frequently asked questions
- Do I need a permit for screen enclosure or pool cage in Dade City?
- Yes. In Florida, screen enclosure or pool cage generally requires a permit, and Dade City is no exception. Building a new aluminum screen enclosure or pool cage requires a building permit statewide, and the frame must be designed to Florida Building Code wind-load provisions with signed and sealed engineering. Replacing only the screen mesh is usually not permitted work, but new construction or structural frame repair is. A pool cage that serves as the pool safety barrier has added requirements.
- Who issues the permit in Dade City?
- The local building department for Dade City handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.