Do I need a permit for screen enclosure or pool cage in Marineland?
Yes. In Florida, screen enclosure or pool cage generally requires a permit, and Marineland is no exception.
Building a new aluminum screen enclosure or pool cage requires a building permit statewide, and the frame must be designed to Florida Building Code wind-load provisions with signed and sealed engineering. Replacing only the screen mesh is usually not permitted work, but new construction or structural frame repair is. A pool cage that serves as the pool safety barrier has added requirements.
Local detail for Marineland: Tiny town with no building department; the official town site publishes no permitting info. IMPORTANT: Marineland legally straddles the Flagler and St. Johns county line, so the issuing county depends on the specific property location. Which county issues Marineland building permits could not be confirmed on an official source. Contact clerk@townofmarineland.org before relying on this. Re-verify when a definitive source is available.
Local and county notes for Marineland
Site-specific engineered wind-load drawings are effectively required for a new enclosure. Setbacks, easements, and HOA rules still apply. Re-screening mesh only is generally exempt; structural work is not. Flagler County's own permitting office is the Flagler County Building Department, reachable on 386-313-4003 at https://www.flaglercounty.gov/Growth-Building/Building-and-Inspections. Its online permit portal is https://cdpweb.flaglercounty.gov/oprs_pt_prod/oprswebv2.dll/. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Florida municipalities do not, this is the office that will handle the job. Screen enclosures are engineered for wind load in Florida, so expect signed and sealed drawings and a structural review.
Documents you may need
- Permit applicationLikely required
- Signed and sealed engineered drawings with wind-load calculationsLikely required
- Site plan showing setbacksLikely required
- Aluminum member and anchoring specificationsSometimes required
Possible inspections
- Footing or slab inspection for a new slab
- Framing or structural inspection
- Final inspection
Frequently asked questions
- Do I need a permit for screen enclosure or pool cage in Marineland?
- Yes. In Florida, screen enclosure or pool cage generally requires a permit, and Marineland is no exception. Building a new aluminum screen enclosure or pool cage requires a building permit statewide, and the frame must be designed to Florida Building Code wind-load provisions with signed and sealed engineering. Replacing only the screen mesh is usually not permitted work, but new construction or structural frame repair is. A pool cage that serves as the pool safety barrier has added requirements.
- Who issues the permit in Marineland?
- The local building department for Marineland handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.