Who issues the permit in Pembroke Pines?

The local building department for Pembroke Pines handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.

How do I find out the exact requirements for my project?

Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.

Do I need a permit for electrical panel or service upgrade in Pembroke Pines?

Permit required

Yes. In Florida, electrical panel or service upgrade generally requires a permit, and Pembroke Pines is no exception.

Upgrading or replacing an electrical panel or service, or changing service amperage, requires an electrical permit in Florida and coordination with the utility. Florida has no statewide electrical exemption to fall back on: Section 105.2 of the Florida Building Code, Building, exempts only certain gas, mechanical and plumbing work and has no electrical category. Many Florida jurisdictions do allow a one-for-one swap of a single wall switch, receptacle or light fixture at about 20 amps or less without a permit, but that is a local allowance rather than a state rule, and it never covers new circuits or any change to the panel or service. Confirm the line with your building department.

Local detail for Pembroke Pines: Building services provided by CGA Solutions (Calvin, Giordano & Associates). Office hours not verified on official source.

Local and county notes for Pembroke Pines

The device-swap exemption does not cover new circuits, rewiring, or panel work, and varies by jurisdiction. Panel relocation adds structural and inspection steps. Every address in this county sits inside the Florida Building Code High Velocity Hurricane Zone, the strictest wind construction standard in the state, so materials and methods face requirements that do not apply elsewhere in Florida. Your city issues the permit, not the county. Broward's 31 municipal building departments each run their own permitting and inspections, while the county Board of Rules and Appeals sets code interpretation and the countywide amendments they all work from. The Broward County Amendments to the Florida Building Code, published by the Board of Rules and Appeals under the county charter, apply on top of the state code everywhere in the county. Individual cities can add their own amendments as well, so confirm both. Pembroke Pines permits are handled by the Pembroke Pines Building Department, reachable on 954-435-6502 at https://www.ppines.com/164/The-Building-Department. Broward County also issues permits for the unincorporated county, and many smaller Florida municipalities contract building services to it rather than running a department of their own, so confirm which office covers your address before you apply. A service change needs the inspection to clear before the utility resets the meter, so schedule it before the changeover day.

Documents you may need

Electrical permit applicationLikely required
Contractor license and insuranceLikely required
Panel or service load calculationLikely required
Utility disconnect and reconnect coordinationLikely required
Product approval or Notice of Acceptance documentation for HVHZ rated materialsSometimes required

Possible inspections

Electrical rough or panel change-out inspection
Final inspection

Frequently asked questions

Do I need a permit for electrical panel or service upgrade in Pembroke Pines?: Yes. In Florida, electrical panel or service upgrade generally requires a permit, and Pembroke Pines is no exception. Upgrading or replacing an electrical panel or service, or changing service amperage, requires an electrical permit in Florida and coordination with the utility. Florida has no statewide electrical exemption to fall back on: Section 105.2 of the Florida Building Code, Building, exempts only certain gas, mechanical and plumbing work and has no electrical category. Many Florida jurisdictions do allow a one-for-one swap of a single wall switch, receptacle or light fixture at about 20 amps or less without a permit, but that is a local allowance rather than a state rule, and it never covers new circuits or any change to the panel or service. Confirm the line with your building department.
Who issues the permit in Pembroke Pines?: The local building department for Pembroke Pines handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
How do I find out the exact requirements for my project?: Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.

PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.