Do I need a permit for plumbing fixture or repiping in Palm Bay?
Yes. In Florida, plumbing fixture or repiping generally requires a permit, and Palm Bay is no exception.
Repiping, meaning replacing supply, drain, waste, or vent piping, requires a plumbing permit in Florida. A straightforward like-for-like replacement of a faucet, sink, or toilet, and clearing stoppages or fixing leaks, is generally exempt as long as no pipe or valve is moved or replaced. As soon as concealed pipe must be removed and replaced, it is treated as new work that needs a permit.
Local detail for Palm Bay: Acting Chief Building Official Scott Stafford. Electronic submission via iMS / ePermitHub Digital Plan Room.
Florida and local notes for Palm Bay
Brevard County's own permitting office is the Brevard County Building Permits office, reachable on 321-633-2187 at https://www.brevardfl.gov/PlanningAndDevelopment/BuildingPermits/BrevardCountyBuildingPermits. Its online permit portal is https://aca-prod.accela.com/brevard/Default.aspx. It issues permits for the unincorporated county. If your city does not run its own building department, this is the office that will handle the job. Brevard County publishes its wind speed requirements as a set of maps, one per Risk Category, that you search by street address. Most houses are Risk Category 2. Screen enclosures are explicitly Risk Category 1, which is a lower design requirement than the house they attach to. Be aware the county's own map instructions still tell you to install Microsoft Silverlight, which no current browser supports, so in practice you may need to call the Building Department on 321-633-2187 to get the design wind speed for your address. Palm Bay's HB 803 exemption for small projects under $7,500 does not apply to plumbing work. The city lists electrical, plumbing, mechanical, gas, and structural work as needing a permit regardless of value. Palm Bay's plumbing checklist requires a plumbing riser diagram showing the type and size of pipe. Palm Bay permits are applied for and inspections are scheduled through the city's iMS portal, with a 3:00 p.m. cutoff to schedule an inspection for the next day.
Documents you may need
- Plumbing permit applicationLikely required
- Contractor license and insuranceLikely required
- Riser or isometric diagram or scope descriptionSometimes required
- Design wind speed for the parcel and its Risk CategorySometimes required
- Palm Bay plumbing permit through iMSLikely required
- Plumbing drawing and riser diagram showing type and size of pipeLikely required
- Owner/builder affidavit if the owner is applying as contractorSometimes required
- Recorded Notice of Commencement or affidavit if value is greater than $5,000Sometimes required
Possible inspections
- Rough plumbing inspection
- Final inspection
Frequently asked questions
- Do I need a permit for plumbing fixture or repiping in Palm Bay?
- Yes. In Florida, plumbing fixture or repiping generally requires a permit, and Palm Bay is no exception. The documents and inspections sections on this page list what the building department typically asks for.
- Who issues the permit in Palm Bay?
- The local building department for Palm Bay handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.