Do I need a permit for fence installation or replacement in Grapevine?

It depends. Whether fence installation or replacement needs a permit in Grapevine comes down to the details of your project.

Texas adopts the International Residential Code as the municipal residential building code by statute. Texas Local Government Code Section 214.212 adopts the code as it existed on May 1, 2012, and that edition exempts fences not over 7 feet high. A city may adopt local amendments, including a lower height, so confirm the rule your city enforces. Texas cities set fence rules by height and location on top of that. Dallas, for example, does not require a permit for fences up to 4 feet in a front yard or 6 feet in side and rear yards, but taller, masonry, or corner-visibility fences may need one. Check HOA rules and plat easement restrictions even when a building permit is not required, and confirm the height thresholds with your local building department. Grapevine Code section 7-121 requires a construction permit for any permanent fence. Replacing less than 50 percent of a legal fence without changing its location or height needs no permit. The permit fee is $21.00 under section 7-123. Fences are capped at 8 feet in rear and side yards, and the application warns of zero tolerance on height. On an interior lot, a fence in the front yard may be no taller than 36 inches, must have at least 50 percent through vision, and may not be chain link. On corner lots, fences are not allowed in the front yard setback except along the interior lot line. Gates across driveways must be set back at least 20 feet from the street property line. In a platted subdivision, fences may not be electrified or made of barbed wire. A fence next to an alley, drainage easement, or utility easement needs at least one gate or opening at least 3 feet wide.