Do I need a permit for fence installation or replacement in Cleburne?

It depends. Whether fence installation or replacement needs a permit in Cleburne comes down to the details of your project.

Texas adopts the International Residential Code as the municipal residential building code by statute. Texas Local Government Code Section 214.212 adopts the code as it existed on May 1, 2012, and that edition exempts fences not over 7 feet high. A city may adopt local amendments, including a lower height, so confirm the rule your city enforces. Texas cities set fence rules by height and location on top of that. Dallas, for example, does not require a permit for fences up to 4 feet in a front yard or 6 feet in side and rear yards, but taller, masonry, or corner-visibility fences may need one. Check HOA rules and plat easement restrictions even when a building permit is not required, and confirm the height thresholds with your local building department. Cleburne requires a permit only for fences over 6 feet tall. The fee is $37.50 plus the $20 administrative fee. Under Section 155.3.08.B, front yard fences are limited to 3 feet at the property line and within sight visibility triangles, 4 feet elsewhere in the front yard, and must be at least 50 percent transparent. Corrugated metal panels and plastic (other than mold-resistant vinyl) are not allowed. A fence may not run parallel to an existing fence unless it is at least 10 feet away. If that separation is not possible, the fence may go on the shared property line. Side or rear fences along the front yard edge of an abutting lot must be set back 10 feet from the street property line.