Do I need a permit for fence installation or replacement in Edinburg?

It depends. Whether fence installation or replacement needs a permit in Edinburg comes down to the details of your project.

Texas adopts the International Residential Code as the municipal residential building code by statute. Texas Local Government Code Section 214.212 adopts the code as it existed on May 1, 2012, and that edition exempts fences not over 7 feet high. A city may adopt local amendments, including a lower height, so confirm the rule your city enforces. Texas cities set fence rules by height and location on top of that. Dallas, for example, does not require a permit for fences up to 4 feet in a front yard or 6 feet in side and rear yards, but taller, masonry, or corner-visibility fences may need one. Check HOA rules and plat easement restrictions even when a building permit is not required, and confirm the height thresholds with your local building department. Edinburg requires a Fence Application to Planning and Zoning before any building permit, including to replace or repair a regulated fence (UDC Sec. 2.206.F). Planning then decides whether a permit is required, not required, or the fence is prohibited. Minor repair or painting needs no permit. A building permit is required for any fence of stone, brick, concrete, steel, fiberglass, vinyl, stucco or other masonry, any fence over 7 feet tall, and any fence in a street yard or on a corner lot, according to the city's fence application. Edinburg limits residential fences to 8 feet in side and rear yards and 3 feet for solid fences in front and street side yards. Chain link is not allowed in front or street yards unless it already exists on the property or the block, and structural supports may not be visible to the public or neighbors. Rear street yard fences must be set back three feet from the rear lot line with shrubs planted between the fence and the right-of-way (UDC Sec. 2.206.F).