Do I need a permit for water heater replacement in Gurnee?
Yes. In Illinois, water heater replacement generally requires a permit, and Gurnee is no exception.
Most Illinois jurisdictions require a permit to replace a water heater, and the work must be done by an Illinois-licensed plumber under the statewide Illinois Plumbing Code. Many local codes require a temperature and pressure relief line, proper venting, and seismic or expansion-tank provisions per the adopted code. Gurnee lists water heaters as their own permit, so replacing a water heater requires a permit and, per State of Illinois rules, the work must be performed by a licensed plumber registered with the Village. Gurnee requires a written, notarized letter of intent from the licensed plumber on company letterhead giving the job address and full scope of work, plus a current IDPH Plumbing Contractor's Registration. If the heater is gas-fired, the fuel-gas connection engages Gurnee amendments that prohibit corrugated stainless steel tubing. File the permit through OneStop at onestop.gurnee.il.us.
Documents you may need
- Water heater spec sheet (capacity, fuel type)required
- Illinois-licensed plumber informationLikely required
- Venting and relief-valve detailsSometimes required
- Village of Gurnee Water Heater permit application (through the OneStop portal)required
- Water heater type information (gas or electric, size)required
- Village-registered licensed plumber on file, with a notarized written letter of intent on company letterhead stating the address and scope of workrequired
Possible inspections
- Plumbing/gas inspection
- Final inspection
- Plumbing inspection of the water heater installation scheduled with the Building Safety Division at 847-599-7550
Frequently asked questions
- Do I need a permit for water heater replacement in Gurnee?
- Yes. In Illinois, water heater replacement generally requires a permit, and Gurnee is no exception. Most Illinois jurisdictions require a permit to replace a water heater, and the work must be done by an Illinois-licensed plumber under the statewide Illinois Plumbing Code. Many local codes require a temperature and pressure relief line, proper venting, and seismic or expansion-tank provisions per the adopted code. Gurnee lists water heaters as their own permit, so replacing a water heater requires a permit and, per State of Illinois rules, the work must be performed by a licensed plumber registered with the Village. Gurnee requires a written, notarized letter of intent from the licensed plumber on company letterhead giving the job address and full scope of work, plus a current IDPH Plumbing Contractor's Registration. If the heater is gas-fired, the fuel-gas connection engages Gurnee amendments that prohibit corrugated stainless steel tubing. File the permit through OneStop at onestop.gurnee.il.us.
- Who issues the permit in Gurnee?
- The local building department for Gurnee handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.