Do I need a permit for plumbing fixture or repiping in Gurnee?
Yes. In Illinois, plumbing fixture or repiping generally requires a permit, and Gurnee is no exception.
Repiping a home's water distribution or drainage requires a permit in most Illinois jurisdictions and must be performed by an Illinois-licensed plumber under the statewide Illinois Plumbing Code. Minor repairs such as clearing a stoppage or replacing a faucet are typically exempt, but replacing or rerouting piping is not. Replacing water, drain, waste or vent piping is plumbing work that requires a permit under the codes Gurnee has adopted and the Illinois State Plumbing Code administered by IDPH. Gurnee requires the plumber to hold a current Chicago or State of Illinois plumbing license plus a current IDPH Plumbing Contractor's Registration, and to submit a notarized written letter of intent describing the scope of work. The plumber must be registered with the Gurnee Building Department before the permit is released, and the permit is filed and inspected through the OneStop online system at onestop.gurnee.il.us.
Documents you may need
- Plumbing plan showing fixtures and pipe runsLikely required
- Illinois-licensed plumber informationrequired
- Pipe material specificationsSometimes required
- Village of Gurnee plumbing permit application (through the OneStop portal)required
- Scope description or drawing of the piping being replacedSometimes required
- Village-registered licensed plumber on file, with IDPH Plumbing Contractor's Registration and a notarized letter of intentrequired
Possible inspections
- Rough plumbing inspection
- Pressure test
- Final inspection
- Rough plumbing inspection of the new water, waste or vent piping
- Final plumbing inspection scheduled with the Building Safety Division at 847-599-7550
Frequently asked questions
- Do I need a permit for plumbing fixture or repiping in Gurnee?
- Yes. In Illinois, plumbing fixture or repiping generally requires a permit, and Gurnee is no exception. Repiping a home's water distribution or drainage requires a permit in most Illinois jurisdictions and must be performed by an Illinois-licensed plumber under the statewide Illinois Plumbing Code. Minor repairs such as clearing a stoppage or replacing a faucet are typically exempt, but replacing or rerouting piping is not. Replacing water, drain, waste or vent piping is plumbing work that requires a permit under the codes Gurnee has adopted and the Illinois State Plumbing Code administered by IDPH. Gurnee requires the plumber to hold a current Chicago or State of Illinois plumbing license plus a current IDPH Plumbing Contractor's Registration, and to submit a notarized written letter of intent describing the scope of work. The plumber must be registered with the Gurnee Building Department before the permit is released, and the permit is filed and inspected through the OneStop online system at onestop.gurnee.il.us.
- Who issues the permit in Gurnee?
- The local building department for Gurnee handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.