Do I need a permit for standby generator installation in Aurora?
Yes. In Illinois, standby generator installation generally requires a permit, and Aurora is no exception.
A permanently installed standby generator involves electrical work (new circuits and a transfer switch) that requires a permit under the Aurora Enabling Code, and Aurora states that fuel-gas lines require a separate permit with Building and Permits. The electrical and gas contractors generally must be registered with Aurora, and the city accepts specified International Code Council electrician and mechanical certifications for that registration. Generator placement must meet Aurora zoning setback rules, and all permits are filed and inspected through the city's eTRAKiT online portal. A permanently installed standby generator requires both electrical and often mechanical/gas permits in most Illinois jurisdictions. Many local codes enforce clearance and location rules and require a listed automatic transfer switch under the adopted National Electrical Code.
Documents you may need
- City of Aurora electrical permit application for the wiring and transfer switch (through eTRAKiT)required
- Fuel-gas line permit application if the generator runs on natural gasLikely required
- Site plan showing the generator location and setbacksSometimes required
- Aurora contractor registration for the electrical and gas contractorsLikely required
- Site plan showing generator location and clearancesrequired
- Electrical single-line and transfer switch detailsrequired
- Gas connection details (natural gas or propane)Likely required
- Equipment spec sheetSometimes required
Possible inspections
- Electrical inspection of the transfer switch and wiring
- Fuel-gas piping inspection where a gas line is installed
- Final generator inspection scheduled through the eTRAKiT portal
- Electrical rough inspection
- Gas/fuel connection inspection
- Final inspection
Frequently asked questions
- Do I need a permit for standby generator installation in Aurora?
- Yes. In Illinois, standby generator installation generally requires a permit, and Aurora is no exception. A permanently installed standby generator involves electrical work (new circuits and a transfer switch) that requires a permit under the Aurora Enabling Code, and Aurora states that fuel-gas lines require a separate permit with Building and Permits. The electrical and gas contractors generally must be registered with Aurora, and the city accepts specified International Code Council electrician and mechanical certifications for that registration. Generator placement must meet Aurora zoning setback rules, and all permits are filed and inspected through the city's eTRAKiT online portal. A permanently installed standby generator requires both electrical and often mechanical/gas permits in most Illinois jurisdictions. Many local codes enforce clearance and location rules and require a listed automatic transfer switch under the adopted National Electrical Code.
- Who issues the permit in Aurora?
- The local building department for Aurora handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.