Do I need a permit for hvac replacement or installation in Aurora?
Yes. In Illinois, hvac replacement or installation generally requires a permit, and Aurora is no exception.
Aurora publishes a dedicated Furnace / AC permit application, so replacing a furnace, air conditioner or heat pump requires a permit under the Aurora Enabling Code. A residential furnace or AC replacement permit is often handled quickly at the counter, but the permit is still required. The mechanical contractor generally must be registered with Aurora, and the city accepts a specified International Code Council Master Mechanical certification in place of local testing for that registration. If the change involves gas piping, the fuel-gas line work also needs a permit with Building and Permits, and everything is filed and inspected through the city's eTRAKiT online portal. Most Illinois jurisdictions require a mechanical permit to replace a furnace, air conditioner or heat pump, even for a like-for-like changeout. Gas piping, venting and any new electrical circuit normally require their own trade permit, inspection and pressure test. Which code edition applies is set by your municipality or county, because Illinois has no statewide residential building code for work on an existing home.
Documents you may need
- City of Aurora Furnace / AC permit application (through eTRAKiT)required
- Equipment specification sheets for the furnace, air conditioner or heat pumpSometimes required
- Aurora contractor registration for the mechanical contractorLikely required
- Equipment spec sheet (size/BTU, efficiency)required
- Contractor license and insurance informationLikely required
- Load calculation for a changeout of different capacitySometimes required
Possible inspections
- Mechanical inspection of the furnace or air-conditioning installation scheduled through the eTRAKiT portal
- Mechanical rough inspection
- Final inspection
Frequently asked questions
- Do I need a permit for hvac replacement or installation in Aurora?
- Yes. In Illinois, hvac replacement or installation generally requires a permit, and Aurora is no exception. Aurora publishes a dedicated Furnace / AC permit application, so replacing a furnace, air conditioner or heat pump requires a permit under the Aurora Enabling Code. A residential furnace or AC replacement permit is often handled quickly at the counter, but the permit is still required. The mechanical contractor generally must be registered with Aurora, and the city accepts a specified International Code Council Master Mechanical certification in place of local testing for that registration. If the change involves gas piping, the fuel-gas line work also needs a permit with Building and Permits, and everything is filed and inspected through the city's eTRAKiT online portal. Most Illinois jurisdictions require a mechanical permit to replace a furnace, air conditioner or heat pump, even for a like-for-like changeout. Gas piping, venting and any new electrical circuit normally require their own trade permit, inspection and pressure test. Which code edition applies is set by your municipality or county, because Illinois has no statewide residential building code for work on an existing home.
- Who issues the permit in Aurora?
- The local building department for Aurora handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.