Do I need a permit for standby generator installation in Schaumburg?
Yes. In Illinois, standby generator installation generally requires a permit, and Schaumburg is no exception.
Schaumburg requires an electrical permit to install a standby generator, and the electrical connection and transfer switch must be installed by a state-licensed electrical contractor holding a Village Contractor's Business License. A natural-gas fuel connection is plumbing work that must be performed by an Illinois state-licensed plumber. Schaumburg does not separately license plumbers because they are licensed by the State of Illinois. Apply through the Village's OpenGov permit portal and confirm the setback, electrical, and gas requirements with the Community Development Department at 847-923-4420 before installation. A permanently installed standby generator requires both electrical and often mechanical/gas permits in most Illinois jurisdictions. Many local codes enforce clearance and location rules and require a listed automatic transfer switch under the adopted National Electrical Code.
Documents you may need
- Generator permit application, including the required electrical permit, filed through the Village of Schaumburg OpenGov permit portalrequired
- Plat of survey or site plan showing the generator location and setbacksLikely required
- Contractor's Business License with the Village for the state-licensed electrical contractorrequired
- Site plan showing generator location and clearancesrequired
- Electrical single-line and transfer switch detailsrequired
- Gas connection details (natural gas or propane)Likely required
- Equipment spec sheetSometimes required
Possible inspections
- Electrical inspection of the transfer switch and wiring by the Community Development Department
- Final generator inspection, including the gas connection where applicable
- Electrical rough inspection
- Gas/fuel connection inspection
- Final inspection
Frequently asked questions
- Do I need a permit for standby generator installation in Schaumburg?
- Yes. In Illinois, standby generator installation generally requires a permit, and Schaumburg is no exception. Schaumburg requires an electrical permit to install a standby generator, and the electrical connection and transfer switch must be installed by a state-licensed electrical contractor holding a Village Contractor's Business License. A natural-gas fuel connection is plumbing work that must be performed by an Illinois state-licensed plumber. Schaumburg does not separately license plumbers because they are licensed by the State of Illinois. Apply through the Village's OpenGov permit portal and confirm the setback, electrical, and gas requirements with the Community Development Department at 847-923-4420 before installation. A permanently installed standby generator requires both electrical and often mechanical/gas permits in most Illinois jurisdictions. Many local codes enforce clearance and location rules and require a listed automatic transfer switch under the adopted National Electrical Code.
- Who issues the permit in Schaumburg?
- The local building department for Schaumburg handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.