Do I need a permit for plumbing fixture or repiping in Sandy Springs?
Yes. In Georgia, plumbing fixture or repiping generally requires a permit, and Sandy Springs is no exception.
Repiping or moving supply and drain lines requires a plumbing permit; a simple like-for-like fixture swap (for example a faucet) using existing connections is often exempt, but confirm locally. Concealed piping must be inspected before walls are closed, so schedule the rough inspection before covering the work. Sandy Springs requires a plumbing permit for all plumbing projects, so a repipe must be permitted even though simple repairs such as unclogging a drain are exempt. The rough inspection must be completed before walls are closed, since the plumbing must remain visible; covering it early commonly forces removal to expose the work. A homeowner may pull the plumbing permit for their own permanent residence; otherwise a Georgia-licensed plumbing contractor must apply. Fulton County's own permitting office is the Fulton County Planning, Zoning and Permitting, reachable on 404-612-7400 at https://www.fultoncountyga.gov/inside-fulton-county/fulton-county-departments/public-works/planning-zoning-and-permitting. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Georgia municipalities do not, this is the office that will handle the job. The rough inspection has to happen before walls are closed, so confirm scheduling lead time when you pull the permit. Work that moves or replaces pipes, rather than swapping a fixture, alters the plumbing system itself and is not covered by fixture replacement exemptions. Pipe work normally requires a plumbing permit, a pressure or air test, and a rough in inspection before walls are closed, and many jurisdictions require a licensed plumber to pull the permit.
Documents you may need
- Plumbing / technical permit applicationrequired
- Scope of work or piping / fixture planSometimes required
- Contractor license and insurance informationSometimes required
- Plumbing permit application through the Build Sandy Springs portalrequired
- Scope describing the repipe extent and materialsLikely required
- Licensed contractor information, or a Residential Owner-Contractor Affidavit for your own permanent residenceLikely required
Possible inspections
- Rough plumbing inspection (for repiping or new lines)
- Final plumbing inspection
- Rough inspection while the plumbing work remains visible and before it is covered by drywall
- Final inspection after completion
Frequently asked questions
- Do I need a permit for plumbing fixture or repiping in Sandy Springs?
- Yes. In Georgia, plumbing fixture or repiping generally requires a permit, and Sandy Springs is no exception. Repiping or moving supply and drain lines requires a plumbing permit; a simple like-for-like fixture swap (for example a faucet) using existing connections is often exempt, but confirm locally. Concealed piping must be inspected before walls are closed, so schedule the rough inspection before covering the work. Sandy Springs requires a plumbing permit for all plumbing projects, so a repipe must be permitted even though simple repairs such as unclogging a drain are exempt. The rough inspection must be completed before walls are closed, since the plumbing must remain visible; covering it early commonly forces removal to expose the work. A homeowner may pull the plumbing permit for their own permanent residence; otherwise a Georgia-licensed plumbing contractor must apply. Fulton County's own permitting office is the Fulton County Planning, Zoning and Permitting, reachable on 404-612-7400 at https://www.fultoncountyga.gov/inside-fulton-county/fulton-county-departments/public-works/planning-zoning-and-permitting. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Georgia municipalities do not, this is the office that will handle the job. The rough inspection has to happen before walls are closed, so confirm scheduling lead time when you pull the permit. Work that moves or replaces pipes, rather than swapping a fixture, alters the plumbing system itself and is not covered by fixture replacement exemptions. Pipe work normally requires a plumbing permit, a pressure or air test, and a rough in inspection before walls are closed, and many jurisdictions require a licensed plumber to pull the permit.
- Who issues the permit in Sandy Springs?
- The local building department for Sandy Springs handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.