Skip to content
PermitRoadmap

Do I need a permit for plumbing fixture or repiping in Macon-Bibb County?

Permit required

Yes. In Georgia, plumbing fixture or repiping generally requires a permit, and Macon-Bibb County is no exception.

Repiping or moving supply and drain lines requires a plumbing permit; a simple like-for-like fixture swap (for example a faucet) using existing connections is often exempt, but confirm locally. Concealed piping must be inspected before walls are closed, so schedule the rough inspection before covering the work. Macon-Bibb enforces the adopted 2018 International Plumbing Code and does not recognize PVC for interior water-distribution piping, so plan the material before you start. Rough plumbing may not be concealed until the Combination Inspector approves it, and partial rough inspections are not performed. A repipe is a Single Trade plumbing permit filed through Community Connect, with a $35 minimum permit fee. Work that moves or replaces pipes, rather than swapping a fixture, alters the plumbing system itself and is not covered by fixture replacement exemptions. Pipe work normally requires a plumbing permit, a pressure or air test, and a rough in inspection before walls are closed, and many jurisdictions require a licensed plumber to pull the permit. Bibb County's own permitting office is the Bibb County Building and Fire Safety office, reachable on 478-803-0466 at https://www.maconbibb.us/buildingpermits/. Its online permit portal is https://app.communitycore.com/. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Georgia municipalities do not, this is the office that will handle the job. The rough inspection has to happen before walls are closed, so confirm scheduling lead time when you pull the permit.

Documents you may need

  • Plumbing / technical permit applicationrequired
  • Scope of work or piping / fixture planSometimes required
  • Contractor license and insurance informationSometimes required
  • Single Trade Permit Application for the plumbing trade, through Community Connectrequired
  • Scope describing the repipe extent and materialsLikely required
  • Contractor license, or an MBC Homeowner Occupant Affidavit if the owner performs the workLikely required

Possible inspections

  • Rough plumbing inspection (for repiping or new lines)
  • Final plumbing inspection
  • Plumbing rough-in inspection before walls are closed
  • Shower pan test where a shower is rebuilt
  • Plumbing or combination final inspection

Frequently asked questions

Do I need a permit for plumbing fixture or repiping in Macon-Bibb County?
Yes. In Georgia, plumbing fixture or repiping generally requires a permit, and Macon-Bibb County is no exception. Repiping or moving supply and drain lines requires a plumbing permit; a simple like-for-like fixture swap (for example a faucet) using existing connections is often exempt, but confirm locally. Concealed piping must be inspected before walls are closed, so schedule the rough inspection before covering the work. Macon-Bibb enforces the adopted 2018 International Plumbing Code and does not recognize PVC for interior water-distribution piping, so plan the material before you start. Rough plumbing may not be concealed until the Combination Inspector approves it, and partial rough inspections are not performed. A repipe is a Single Trade plumbing permit filed through Community Connect, with a $35 minimum permit fee. Work that moves or replaces pipes, rather than swapping a fixture, alters the plumbing system itself and is not covered by fixture replacement exemptions. Pipe work normally requires a plumbing permit, a pressure or air test, and a rough in inspection before walls are closed, and many jurisdictions require a licensed plumber to pull the permit. Bibb County's own permitting office is the Bibb County Building and Fire Safety office, reachable on 478-803-0466 at https://www.maconbibb.us/buildingpermits/. Its online permit portal is https://app.communitycore.com/. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Georgia municipalities do not, this is the office that will handle the job. The rough inspection has to happen before walls are closed, so confirm scheduling lead time when you pull the permit.
Who issues the permit in Macon-Bibb County?
The local building department for Macon-Bibb County handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
How do I find out the exact requirements for my project?
Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.

PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.