Do I need a permit for screen enclosure or pool cage in Aurora?
Yes. In Colorado, screen enclosure or pool cage generally requires a permit, and Aurora is no exception.
A structural screened porch or patio cover is a building addition that generally needs a permit; a light insect screen on an existing covered patio may not. Because Colorado has no statewide code, confirm the trigger with your local building department. In snow country the roof or cover framing of an enclosure must be designed for local snow loads, which can require engineered details even for a light structure. A covered or enclosed patio, sunroom, or screen room in Aurora is a structure that generally requires a building permit, unlike a simple on-grade patio slab, and it is submitted through the Aurora4Biz portal (aurora4biz.org). Roof or cover framing generally must be engineered for Aurora's snow load, so plans typically need beam, post, and footing details reviewed under the 2021 IRC. Zoning setbacks under Aurora's Unified Development Ordinance apply to the enclosure footprint, so confirm placement before you build.
Documents you may need
- Permit applicationLikely required
- Site plan showing the enclosure location and setbacksrequired
- Structural/framing details for the enclosure and any roof or coverSometimes required
- Building permit application through Aurora4Biz for the patio cover or enclosurerequired
- Site plan showing the structure location, dimensions, and setbacksrequired
- Structural details for framing, footings, beams, and posts with applicable snow-load designrequired
Possible inspections
- Footing/attachment inspection where applicable
- Final inspection
- Footing or foundation inspection
- Framing inspection
Frequently asked questions
- Do I need a permit for screen enclosure or pool cage in Aurora?
- Yes. In Colorado, screen enclosure or pool cage generally requires a permit, and Aurora is no exception. A structural screened porch or patio cover is a building addition that generally needs a permit; a light insect screen on an existing covered patio may not. Because Colorado has no statewide code, confirm the trigger with your local building department. In snow country the roof or cover framing of an enclosure must be designed for local snow loads, which can require engineered details even for a light structure. A covered or enclosed patio, sunroom, or screen room in Aurora is a structure that generally requires a building permit, unlike a simple on-grade patio slab, and it is submitted through the Aurora4Biz portal (aurora4biz.org). Roof or cover framing generally must be engineered for Aurora's snow load, so plans typically need beam, post, and footing details reviewed under the 2021 IRC. Zoning setbacks under Aurora's Unified Development Ordinance apply to the enclosure footprint, so confirm placement before you build.
- Who issues the permit in Aurora?
- The local building department for Aurora handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.