Do I need a permit for pavers, driveway, or hardscape in Sherman?
It depends. Whether pavers, driveway, or hardscape needs a permit in Sherman comes down to the details of your project.
At-grade patios, walkways, and paver areas are often exempt, but many Texas cities regulate added impervious cover, driveway approaches in the public right-of-way, and drainage. A retaining wall above a set height typically requires its own permit and engineering. Confirm impervious-cover limits and right-of-way rules with your local building department. Sherman does not publish a permit rule for at-grade patios or pavers. A retaining wall 4 feet or taller must be engineered, with the design submitted to the Engineering Department before construction and a stamped letter from the engineer of record after inspection (Code section 3.03.002(a)(6)). Under Code section 3.10.005, building, rebuilding, or repairing a driveway approach in the public right-of-way requires a city permit and a $1,000 bond. Code section 14.04.003(c)(1) requires required parking and driveways in single-family districts to be paved with concrete or asphalt, so a paver driveway should be confirmed with Development Services first.
Get the answer for your exact project
Answer a few questions to see the permits, documents and inspections that may apply in Sherman.
Documents you may need
- Permit applicationSometimes required
- Site or drainage plan showing impervious coverSometimes required
- Engineered retaining wall design submitted to the Engineering DepartmentSometimes required
- Access driveway permit and $1,000 bond for work in the right-of-waySometimes required
Possible inspections
- Drainage or grading inspection (where required)
- Final inspection
- Engineer of record inspection and stamped letter for engineered retaining walls
Frequently asked questions
- Do I need a permit for pavers, driveway, or hardscape in Sherman?
- It depends. Whether pavers, driveway, or hardscape needs a permit in Sherman comes down to the details of your project. The documents and inspections sections on this page list what the building department typically asks for.
- Who issues the permit in Sherman?
- The local building department for Sherman handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.