Do I need a permit for standby generator installation in Clovis?
Yes. In New Mexico, standby generator installation generally requires a permit, and Clovis is no exception.
Building, electrical, mechanical/plumbing, and LP gas work each need a separate permit (14.5.2.8(D) NMAC). Gas fittings are governed by the New Mexico Mechanical Code, and LP gas systems by the LPG and CNG Act (NMSA 70-5-1 et seq.) and 19.15.40 NMAC (14.5.1.7 NMAC). An LP04 licensee may install LP gas appliances and piping in residences (CID FAQ). All wiring requires a permit and inspection (CID FAQ).
Documents you may need
- Electrical permit applicationRequired
- Generator and transfer switch specificationsLikely required
- Gas piping or LP gas installation planLikely required
- Site plan showing clearancesSometimes required
Possible inspections
- Electrical rough and final inspections
- Gas pressure test and final mechanical inspection
- LP gas inspection where propane is used
Frequently asked questions
- Do I need a permit for standby generator installation in Clovis?
- Yes. In New Mexico, standby generator installation generally requires a permit, and Clovis is no exception. The documents and inspections sections on this page list what the building department typically asks for.
- Who issues the permit in Clovis?
- The local building department for Clovis handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.