Skip to content
PermitRoadmap

Do I need a permit for standby generator installation in Conway?

Permit likely required

Most likely yes. Standby generator installation usually requires a permit in New Hampshire. Confirm the specifics with Conway.

The state code requires a permit to install an electrical or gas system, and the gas exemptions cover only portable appliances and minor part replacements (NH Building Code Administrative Amendment 105.1, 105.2.2). Fuel gas fitting requires a state license except for a person working on an existing single family, stand alone home they own and use as their primary residence, and that work must still meet any applicable code, application and inspection requirements (RSA 153:36, I). Electrical installations must be made by a licensed electrician, except that a homeowner may do the wiring in or about a single family residence they own and occupy, or will occupy, as their own home (RSA 319-C:15). Fuel gas work follows the edition of NFPA 54 cited in the state fire code and is enforced by the building official and the fire code official (NH Building Code Administrative Amendment 101.4.2).

Get the answer for your exact project

Answer a few questions to see the permits, documents and inspections that may apply in Conway.

Check my project

Documents you may need

  • Electrical permit from the town or city building official, where the town enforces the state building codeLikely required
  • Gas permit and licensed fuel gas fitter for a natural gas or propane unit, unless the owner qualifies for the homeowner exemptionLikely required
  • Transfer switch and equipment specificationsLikely required
  • Site plan showing the generator location and clearancesSometimes required

Possible inspections

  • Electrical inspection of the transfer switch and wiring
  • Gas piping pressure test and inspection
  • Final inspection

Frequently asked questions

Do I need a permit for standby generator installation in Conway?
Most likely yes. Standby generator installation usually requires a permit in New Hampshire. Confirm the specifics with Conway. The documents and inspections sections on this page list what the building department typically asks for.
Who issues the permit in Conway?
The local building department for Conway handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
How do I find out the exact requirements for my project?
Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.

PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.