Skip to content
PermitRoadmap

Do I need a permit for standby generator installation in Unincorporated Richland County?

Permit required

Yes. In Montana, standby generator installation generally requires a permit, and Unincorporated Richland County is no exception.

An electrical permit is required for any electrical installation in construction, remodeling or repair, issued by the state Building Codes Program or by a city, county or town certified to enforce the electrical code (ARM 24.301.431, MCA 50-60-604). The state's alternative energy permit covers generators as well as solar, wind and hydro sources (Building Codes Program Alternative Energy Permit application). The electrician licensing exemption for work on your own residence does not cover a grid-tied generator, meaning one designed to operate in parallel with the utility (MCA 37-68-103(3)(b), 37-68-102). A power supplier may not connect or energize an electrical installation until the owner or a licensed electrical contractor delivers an electrical permit covering it (MCA 50-60-605).

Get the answer for your exact project

Answer a few questions to see the permits, documents and inspections that may apply in Unincorporated Richland County.

Check my project

Local detail for Unincorporated Richland County: Richland County is certified for building code enforcement (building only) in the county outside the City of Sidney, which has its own certified program run by the same building inspector. Electrical, mechanical and plumbing permits come from the State of Montana Building Codes Bureau.

Documents you may need

  • Electrical permit from the state Building Codes Program, or from the certified local electrical programRequired
  • Licensed electrical contractor, or a state homeowner electrical permit for your own home kept for personal useRequired
  • Transfer switch and generator specificationsLikely required
  • Gas or propane piping details, and a local mechanical permit where a certified program requires oneSometimes required

Possible inspections

  • Electrical rough-in and final inspection, including the transfer switch
  • Gas piping pressure test where a local mechanical permit applies

Frequently asked questions

Do I need a permit for standby generator installation in Unincorporated Richland County?
Yes. In Montana, standby generator installation generally requires a permit, and Unincorporated Richland County is no exception. The documents and inspections sections on this page list what the building department typically asks for.
Who issues the permit in Unincorporated Richland County?
The local building department for Unincorporated Richland County handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
How do I find out the exact requirements for my project?
Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.

PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.