Do I need a permit for standby generator installation in Unincorporated Lake County?
Unincorporated Lake County does not issue residential building permits. Unincorporated Lake County is not on the Montana Building Codes Program list of certified local building code jurisdictions, so no local building permit or building code inspection applies to a home here; the area falls under the State Building Codes Bureau, which says a building permit is not required for a single family residence outside a certified local jurisdiction. State electrical permits from the Bureau still apply to wiring (a homeowner may wire their own home under a state homeowner's electrical permit), and plumbing done by a plumber needs a state plumbing permit. The county Planning Department handles zoning permits, building notification permits, lakeshore construction permits and floodplain permits; these are land use permits, not building code permits.
The requirements below come from Montana rules and describe the standard the work must still meet. They are not a statement that Unincorporated Lake County will issue you a permit.
Yes. In Montana, standby generator installation generally requires a permit, and Unincorporated Lake County is no exception.
An electrical permit is required for any electrical installation in construction, remodeling or repair, issued by the state Building Codes Program or by a city, county or town certified to enforce the electrical code (ARM 24.301.431, MCA 50-60-604). The state's alternative energy permit covers generators as well as solar, wind and hydro sources (Building Codes Program Alternative Energy Permit application). The electrician licensing exemption for work on your own residence does not cover a grid-tied generator, meaning one designed to operate in parallel with the utility (MCA 37-68-103(3)(b), 37-68-102). A power supplier may not connect or energize an electrical installation until the owner or a licensed electrical contractor delivers an electrical permit covering it (MCA 50-60-605).
Get your exact answer
Answer a few questions to see the specific permits, documents, and next steps for your standby generator installation in Unincorporated Lake County.
Check my projectDocuments you may need
- Electrical permit from the state Building Codes Program, or from the certified local electrical programRequired
- Licensed electrical contractor, or a state homeowner electrical permit for your own home kept for personal useRequired
- Transfer switch and generator specificationsLikely required
- Gas or propane piping details, and a local mechanical permit where a certified program requires oneSometimes required
Possible inspections
- Electrical rough-in and final inspection, including the transfer switch
- Gas piping pressure test where a local mechanical permit applies
Frequently asked questions
- Do I need a permit for standby generator installation in Unincorporated Lake County?
- Yes. In Montana, standby generator installation generally requires a permit, and Unincorporated Lake County is no exception. The documents and inspections sections on this page list what the building department typically asks for.
- Who issues the permit in Unincorporated Lake County?
- The local building department for Unincorporated Lake County handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.