Skip to content
PermitRoadmap

Do I need a permit for solar panel installation in Glendive?

Glendive does not issue residential building permits. Glendive is not on the Montana Building Codes Program list of certified local building code jurisdictions, so no local building permit or building code inspection applies to a home here; the area falls under the State Building Codes Bureau, which says a building permit is not required for a single family residence outside a certified local jurisdiction. State electrical permits from the Bureau still apply to wiring (a homeowner may wire their own home under a state homeowner's electrical permit), and plumbing done by a plumber needs a state plumbing permit. The city still requires its no-cost Zoning Permit from the Public Works Department for construction projects, from fences and decks to whole buildings.

The requirements below come from Montana rules and describe the standard the work must still meet. They are not a statement that Glendive will issue you a permit.

Permit required

Yes. In Montana, solar panel installation generally requires a permit, and Glendive is no exception.

An electrical permit is required for any electrical installation in construction, remodeling or repair, issued by the state Building Codes Program or by a city, county or town certified to enforce the electrical code (ARM 24.301.431, MCA 50-60-604). The state alternative energy permit application says that if a system is grid tied, a licensed electrical contractor must obtain a permit and do the work for the final connection (Building Codes Program Alternative Energy Permit application). The electrician licensing exemption for work on your own residence does not cover electrical work on a grid-tied generator at that residence (MCA 37-68-103(3)(b)). A power supplier may not connect or energize an electrical installation until the owner or a licensed electrical contractor delivers an electrical permit covering it (MCA 50-60-605).

Get your exact answer

Answer a few questions to see the specific permits, documents, and next steps for your solar panel installation in Glendive.

Check my project

Documents you may need

  • Electrical permit (alternative energy permit) from the state Building Codes Program, or from the certified local electrical programRequired
  • Licensed electrical contractor permit for the final grid connection of a grid-tied systemRequired
  • System type and voltage details (string, microinverter or AC module)Likely required
  • Building permit for roof structure from the certified city, county or town, where its program covers homesSometimes required
  • Utility interconnection agreementLikely required

Possible inspections

  • Electrical rough-in and final inspection
  • Structural or roof inspection where a local building permit applies

Frequently asked questions

Do I need a permit for solar panel installation in Glendive?
Yes. In Montana, solar panel installation generally requires a permit, and Glendive is no exception. The documents and inspections sections on this page list what the building department typically asks for.
Who issues the permit in Glendive?
The local building department for Glendive handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
How do I find out the exact requirements for my project?
Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.

PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.