Do I need a permit for plumbing fixture or repiping in Highland Park?
Highland Park does not issue residential building permits. The Village of Highland Park does not run its own building department. The village states that it must first review and approve any building permit (using its Permit Authorization Form, handled by the City Manager at citymanager@highlandpark-fl.org) before the application is submitted to Polk County, and the Polk County Building Division (330 W. Church St., Bartow, 863-534-6080) then issues the permit through the Polk County Access Portal. The village also contracts with Polk County for code enforcement. The phone and address listed are the village office.
The requirements below come from Florida rules and describe the standard the work must still meet. They are not a statement that Highland Park will issue you a permit.
Yes. In Florida, plumbing fixture or repiping generally requires a permit, and Highland Park is no exception.
Repiping, meaning replacing supply, drain, waste, or vent piping, requires a plumbing permit in Florida. A straightforward like-for-like replacement of a faucet, sink, or toilet, and clearing stoppages or fixing leaks, is generally exempt as long as no pipe or valve is moved or replaced. As soon as concealed pipe must be removed and replaced, it is treated as new work that needs a permit.
Get your exact answer
Answer a few questions to see the specific permits, documents, and next steps for your plumbing fixture or repiping in Highland Park.
Check my projectLocal and county notes for Highland Park
A like-for-like fixture swap with no change to the pipes is generally exempt under the Florida Building Code. It becomes permit work the moment you move or replace a pipe or valve. When in doubt, confirm with your building department. Repiping and moving or replacing pipe require a plumbing permit statewide. Water-service line replacement also needs a permit. Polk County's own permitting office is the Polk County Building Division, reachable on 863-534-6080 at https://www.polkfl.gov/services/building/. Its online permit portal is https://aca-prod.accela.com/POLKCO/. It issues permits for the unincorporated county. If your city does not run its own building department, and many smaller Florida municipalities do not, this is the office that will handle the job. The rough inspection has to happen before walls are closed, so confirm scheduling lead time when you pull the permit.
Documents you may need
- Plumbing permit applicationLikely required
- Contractor license and insuranceLikely required
- Riser or isometric diagram or scope descriptionSometimes required
Possible inspections
- Rough plumbing inspection
- Final inspection
Frequently asked questions
- Do I need a permit for plumbing fixture or repiping in Highland Park?
- Yes. In Florida, plumbing fixture or repiping generally requires a permit, and Highland Park is no exception. The documents and inspections sections on this page list what the building department typically asks for.
- Who issues the permit in Highland Park?
- The local building department for Highland Park handles permitting. This page lists its contact details and online portal. Your mailing city is not always the permitting authority, so confirm the jurisdiction before you apply.
- How do I find out the exact requirements for my project?
- Run the free PermitRoadmap check for your specific project and answers. It returns the likely permits, documents, inspections, and next steps, each linked to its official source.
PermitRoadmap is an independent informational service and is not affiliated with any city, county, state agency, or permitting authority. Results are informational and do not replace confirming requirements with the local permitting authority.